New Improved 10" Deluxe Bandsaw 1/2 HP, 2 speed, tool-less guides,
The new and improved 10” Bandsaw 10-3061 is a replacement of our previous 10-306 model. Numerous features make this bandsaw extremely easy to operate and make adjustments to the blade, guides and fence. The increased cutting capacity, 2 blade speeds, and increased 1/2HP motor are quite ample enough for smaller projects, and will be appreciated by woodworkers having limited shop space for a larger size bandsaw. Improved features for easy operation – 2 blade speeds, tool-less blade guides, quick-release blade tension lever, tilting 0-45° cast iron table, adjustable rip fence, larger blade tension knob, dust port for shop vacuum hookup, side windows for viewing blade tracking settings, storage hanger for the fence and tools, and safety paddle on/off switch. Reduced size is ideal for transporting, or storing, when not in use. Includes rip fence. Steel stand is available separately. This redesigned model includes a new 2-1/2” Dust Port which has been moved up from the base and is also now tilted upward 10°, so dust fittings will attach to it easier. The Door Hinges have been redesigned to make them sturdier to avoid breakage. Fence Carrier now has 4 additional plastic inserts in case fence tilt adjustments are needed. Rip Fence is supplied with a plastic pad on its end to allow the fence to slide easier. Lower bandsaw frame construction has been improved for positioning of the Lower Connecting Plate and Guide Assembly. Screws in the lower connecting plate have been changed for easier access with hex wrenches, if plate adjustment is needed. Upper bandsaw frame and guide assembly has been tweaked to ensure a consistent 5” maximum cutting height can be achieved. » Read Less NEW Redesign Features: Easy Fitting Dust Port Sturdy Door Hinges Adjustable Fence Carrier Easy Sliding Rip Fence System Easy cutting adjustments Standard Features: Patented Spring Loaded Tool-less Guide System Quick-Release Blade Tension Lever 2 Blade Speeds 1,515 or 3,250 ft. / min Powerful 1/2 HP Motor Cutting Height of 5” with 9-5/8” Width Available October 2019
Tech SpecsMotor Horsepower 1/2 HP Amps 5.5 Volts 110V, 60Hz Speed 1,720 RPM Cutting Capacity Height 5” Width 9-5/8” Blade (Includes 5/16“ x 6TPI, Regular) Width 1/8” – 1/2” Length 70-1/2” 2 Blade Speeds 1,515/ 3,280 ft/min Table Size 13-3/4” x 12-1/2” Left Tilt 5° Right Tilt 45° Miter Gauge Slot 5/8” x 1/4” Height to Floor (with 13-913 stand) 39-7/8” Height to Base 14-1/2” Fence Size 12-1/4” x 2-3/8” Overall Height 34-1/4” Width 21” Depth 16-1/4” Base Size 15-7/8” x 9-3/8” Dust Port 2-1/2” O.D., 2-5/16” I.D. Net Weight 77.5 lbs. Shipping Weight 86 lbs. Shipping Carton 35-1/2” x 12-3/4” x 18-1/4” Warranty 5 Years
FeaturesNEW Redesign Features Include:
Accessories12-201 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip 13-913 Optional 10” Bandsaw Stand. Top: 14-1/2” x 9-3/4”, Base: 25” x 18-3/4”, Height: 25” 13-920 Miter Gauge Aluminum body with 60° scale for left and right settings C10-109 Replacement Guide Bearings Pack of 6 C10-393 Replacement Table Inserts Pack of 4 C10-394 Zero Clearance Inserts Pack of 4 C10-405 10″ Rubber Wheel Tire C10-990 Drive Belt 19-7006 Bandsaw Blade 70-1/2″ in length and 1/8″ wide with .025 Gauge. There are 8 teeth per inch in a regular tooth configuration. 19-7007 Bandsaw Blade 70-1/2″ in length and 1/8″ wide with .018 Gauge. There are 14 teeth per inch in a hook tooth configuration. 19-7002 Bandsaw Blade 70-1/2″ in length and 3/16″ wide with .025 Gauge. There are 10 teeth per inch in a regular tooth configuration. 19-7003 Bandsaw Blade 70-1/2″ in length and 1/4″ wide with .025 Gauge. There are 6 teeth per inch in a regular tooth configuration. 19-7004 Bandsaw Blade 70-1/2″ in length and 3/8″ wide with .025 Gauge. There are 4 teeth per inch in a skip tooth configuration. 19-7005 Bandsaw Blade 70-1/2″ in length and 1/2″ wide with .025 Gauge. There are 3 teeth per inch in a hook tooth configuration.